OLIVETTI D-COPIA 120D DRIVER DETAILS:
|File Size:||33.5 MB|
|Supported systems:||Windows XP/Vista/7/8/10, MacOS 10/X|
|Price:||Free* (*Free Registration Required)|
OLIVETTI D-COPIA 120D DRIVER
To print on both sides of the paper, see page Press the start key.
Olivetti D-COPIA 120D Operation Manual
If you are using the single bypass Do not press the start key. Insert a sheet of paper into the single bypass. Page 17 Multiple copies are not olivetti d-copia 120d using the single bypass.
This will cause a misfeed. About interrupt copying If you press the start key to begin a copy job while a print job using the paper tray is in progress, the copy job will begin automatically after the print data in the unit's memory is printed interrupt copying. When this is done, the print data remaining in the computer is not sent to the unit. When the copy job ends, press the clear key twice, or press the ON LINE key once to change the unit to the online state p. The remaining print data will be sent olivetti d-copia 120d the unit and printing will resume.
Interrupt copying is not possible during a print job using the single bypass. Also image loss 4.
It can be 6 mm max. If the original cover is not securely closed, the copies may be striped or blurred.
Align it with the original scale and the centering mark. If not, original misfeeds may result. If this indicator does not light up, the originals are not properly set or the SPF is not properly closed. It is recommended that such originals be copied from the original table. Also image loss max. Original face up Stream feeding mode The stream feeding mode allows olivetti d-copia 120d operation of continuous copying from the SPF.
If the stream feeding mode has been enabled olivetti d-copia 120d user program No. While this indicator is blinking, any new originals placed in the original feeder tray will be fed and copied automatically. If the stream feeding mode has been disabled, the start key must be pressed each time the originals are set even immediately after completion of a copy run from the SPF. The default setting of the stream feeding mode is "ON".
Download drivers Olivetti SPA
This key will not change the tens digit. To adjust the copy density manually or to copy photographs, the exposure level can be adjusted in olivetti d-copia 120d steps manually. If exposure level 2 is selected, the two left-handmost indicators for that level will light up simultaneously. Also, if level 4 is selected, the two righthandmost indicators for that level will light up simultaneously. The automatic exposure level can be adjusted to suit your copying needs. This level is set for copying from the original table and copying from the SPF respectively.
Olivetti d-Copia 120D (finished distribution)
When adjusting the level for copying from the olivetti d-copia 120d table, make sure that no original is left in the original feeder tray. The photo indicator will go out and the AUTO indicator will begin to blink.
One or two exposure indicators corresponding to the automatic exposure level which has been selected will light up. The AUTO indicator will stop blinking and light up steadily.Olivetti d-Copia D is a multiple-function A4 format device equipped with printing function, colour scanning, and a duplex unit for double-sided copying and. View and Download Olivetti D-COPIA D operation manual online. Olivetti Olivetti d-copia 120d User Manual.
D-COPIA D Copier pdf manual download. Also for.